Release 10.1A: OpenEdge Getting Started:
Installation and Configuration

Accessing a server behind a firewall

OpenEdge allows you to use the Minimum Dynamic Server Port (-minport) and the Maximum Dynamic Server Port (-maxport) server startup parameters to provide client access to an OpenEdge server that is behind a firewall. This communication is possible only when the access to the server can be limited. You supply this limit when you specify a group of port numbers with the -minport and -maxport parameters.

For example, suppose you start the following two login brokers:

proserve db -S demosv1 -N tcp -H myhost -minport 4000 -maxport 4040 proserve db -S demosv2 -N tcp -H myhost -minport 4041 -maxport 4080 -m3

A client requesting a connection from the first broker, demosv1, is assigned a port number in the range of 4000 to 4040. The 4000-to-4040 range limits access to the server by limiting communication to just 40 ports.

The default for -minport is 1025 for all platforms. Ports lower than 1025 are usually reserved for system TCP and UDP. The default for -maxport is 2000 for all platforms. Remember that some operating systems choose transient client ports in the 32768-to-65535 range. Choosing a port in this range might produce unwanted results.